Creative NOMAD Jukebox 6/10/20/c MP3 Player Firmware Ver 2.98

Publisher's description of Creative NOMAD Jukebox 6/10/20/c MP3 Player Firmware Ver 2.98

This firmware is for use only on the following products:

* Nomad Jukebox
* Nomad Jukebox 10GB
* Nomad Jukebox 20GB
* Nomad Jukebox C-Series

To flash the new firmware

* Attach the Jukebox player to your PC with a USB cable.
* Run JukeBoxFw298I.exe.
* When the Jukebox player is detected, click Upgrade.
* When finished, click Close.
* Detach the Jukebox player from PC.
* Press and hold STOP to power down the Jukebox player.

To verify the firmware version

* Press Play to power the Jukebox player.
* When Active Queue List appears, press EAX for the System Menu.
* Press Down button until System Information is highlighted.
* Press the middle soft button to select.
* The top line of System Information should read:

To switch from 4.01 to 2.98

* Press LIB to enter system Menu.
* Scroll down until Jukebox Settings is highlighted.
* Press the Select soft button to select.
* Highlight Personalization.
* Press the Select soft button to enter Personalization menu.
* Scroll to the bottom and highlight Restart OS Version 2.98.
* Select OK from the pop-up menu. The Jukebox will shut down.
* Press the Play button to restart into OS 2.98.

To switch from 2.98 to 4.01

* Press EAX to enter the EAX and System Menu.
* Scroll down to highlight System Preferences.
* Press the middle soft button to open.
* Scroll down to highlight Current OS Version 2.98.
* Use Plus or Minus soft button to change version to 4.01.
* Press the Set soft button. The Jukebox will shut down.
* Press the Play button to restart into OS 4.01.

Download Creative NOMAD Jukebox 6/10/20/c MP3 Player Firmware Ver 2.98