Samsung NX Mini Camera Firmware Upgrade guide (i-Launcher)
User Drivers » Digital Camera » Samsung
- Easy Firmware upgrade: Please use i-Launcher program. (You can install "i-Launcher" program using installation CD.)
- You can also install i-Launcher using NX mini camera. (refer to next page)
- If you download Firmware from Samsung.com homepage directly, refer to No.7
※Information
1) Use the full charged battery
2) Suggested memory card f ormat before upgrade start
3) During the updating process:
Do not cut off the power / Do not remove the battery
→ It causes the cannot power-on or the severe damage
4) Finish upgrade: all menu will be reset
Installing i-Launcher using NX mini
1. Turn off the camera.
2. Connect the camera to your computer with the USB cable.
- Before installing the program, ensure that the PC is connected to a network.
- You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. your files. The manufacturer is not responsible for any loss of data.
3. Turn on the camera.
4. Install i-Launcher on the PC.
When the pop-up window prompting you to install i-Launcher, select Yes.
- If a pop-up window prompting you to run iLinker.exe appears, run it first.
- If the pop-up window prompting does not appear, click My Computer i-Launcher iLinker.exe.
- When you connect the camera to a computer with i-Launcher installed, the program will launch automatically.
5. Follow the on-screen instructions to complete the installation.
- An i-Launcher shortcut will appear on the computer.
[Opening i-Launcher]
- Windows OS: Start All Programs Samsung i-Launcher
- Mac OS Applications Samsung i-Launcher
Firmware upgrade method
1. You can connect the camera to your computer
2. Opening "Samsung i-Launcher"
→ select "Firmware Upgrade" menu
* Automatically "Upgrade window" open if new firmware registered.
3. You can check precautions
4. Firmware download start
5. Once the transfer is complete, click the Close button
6. Terminate the USB cable connection
7. Turn the camera on
※If you don't use i-Launcher but download Firmware from Samsung.com homepage directly
→ unzip "zip" file & copy firmware file to SD card
8. Select the MENU → Setting
→ Device Information
9. Select "Firmware Update"
→ Select "Body Firmware"
10. Update will start follow below sequence
①Firmware version checking, Press "Yes" Upgrade start
②Processing
You can see the updating status
③Power-off (Upgrade Finished)
NX-mini Auto power-off