Kingston SSD Toolbox 2.0 for Windows XP/Vista/7/8 x86/x64

User Drivers » RAID & HD Controller » Kingston »
Date Added: October 28, 2014 / Release Date: July 02, 2014 / Publisher: Kingston / File Size: 1.02 MB
OS: Windows XP 32-bit, Windows Vista 32-bit, Windows Vista 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows 8 32-bit, Windows 8 64-bit


Kingston Toolbox 2.0 enables users to read drive information such as Serial Numbers, Firmware versions, and S.M.A.R.T. attributes. Kingston’s Toolbox v2.0 software, instructions and the S.M.A.R.T. Attribute decoder are included in this download.

Your SATA controller must be configured for AHCI mode within the BIOS and you must connect the drive to a native SATA port. Third party SATA ports are not supported when updating your firmware. For Windows 8, 7 and Vista users, the utility must be run in the OS as "Administrator".

Supported Operating Systems:
Windows 8, 7 (SP1), Vista (SP2) and Windows XP (SP3) – Administrator rights required.

Requirements: Sandforce-based Kingston SSDs (PDF reader required for instructions and S.M.A.R.T Attribute decoder)

Note for MAC and Linux Users
The Kingston Toolbox is not compatible with Mac OS or Linux distributions.

Recent Drivers

Kingston SHFS37A/120G/240G SSD Firmware Update Rev.580ABBF0
Kingston SSD Toolbox 2.0 for Windows XP/Vista/7/8 x86/x64
Kingston SKC100S3 SSD Firmware Update Rev.503 for Linux/Windows XP/Vista/7
Kingston SH103S3 Toolbox 1.0 for Windows XP/Vista/7 x86/x64
Kingston SE100S37 SSD Firmware Update 515ABBF0 for Linux