Netgear WNDAP620 Access Point Firmware Upgrade 2.0.4

User Drivers » LAN / Network Adapter » Netgear »
Date Added: July 27, 2013 / Publisher:Netgear / File Size: 18.3 MB
OS: Windows, Mac OS, Linux

Release Date: June 10, 2013.

New Features and Enhancements:

To Install

Write down all the settings which you changed from the default values, since you may need to reenter them manually.
Download using the button below to a convenient place such as your desktop.
Login to Web Administration interface of the Access Point - By default, http://192.168.0.100 is the Administration URL to the Web GUI. Enter admin for the user name and password for the password.
Click Maintenance > Upgrade > Firmware Upgrade.
Click Browse and select the firmware image you just downloaded.
Click Upload.
Do NOT interrupt or power off the computer until the upgrade process is completed. Wait for the AP to reboot.
After the access point boots up, log in the access point again.
You MUST Reset the router to default settings after upgrading the firmware
Click Maintenance > Upgrade > Restore Settings.
Click Restore. The AP reboots when the Erase operation is done.
If you would like to check that the upgrade was successful, log in to the router again at http://192.168.0.100, and check the firmware version.

Recent Drivers