Netgear WFS709TP ProSafe Smart Wireless Controller Firmware Upgrade 2.5.6.24_22925

Publisher's description of Netgear WFS709TP ProSafe Smart Wireless Controller Firmware Upgrade 2.5.6.24_22925

Bug Fixes:

1. Redirection does not work after user fails auth first time and successfully authenticates in second attempt idle timer of 1 minute user it takes longer to time out the user
2. Issues with data base corruption
3. High CPU utilization when AP reaches uptime of 49 days and a few hours
4. dot1x user gets a role from server derivation rule but later falls into default dot1x role
5. Changing "Advanced Authentication" applies to multiple WLAN profiles
6. UI disables DHCP server when only scope needs to be deleted
7. "Deny Broadcast" / "Ignore Broadcast probe request" is enabled by default
8. Users added to local db are lost after switch looses power
9. Firefox 3.0  support
10. local user-db entry is lost after switch is power cycled
11. Proxy host and ip configuration is retained
12. Option to default switch does not clear persistent information
13. Radius accounting configuration support has been added.
14. Option to select Bridge mode under Radio has been removed.
15. WebUI displays Native vlan id for trunk port when native vlan is set to default i.e. vlan 1.
16. Cannot delete the loopback IP address
17. Error in applying the setup parameters if default gateway is not specified
18. Unable to configure the summer-time zone configuration through GUI
19. Cannot set expiration date or time for internal database use
20. Battery boost feature
21. Safari and Firefox on Mac
22. SSL vulnerability Fix

Download Netgear WFS709TP ProSafe Smart Wireless Controller Firmware Upgrade 2.5.6.24_22925