Netgear SRXN3205 Firewall Firmware Upgrade 3.1.1-08

User Drivers » LAN / Network Adapter » Netgear »
Date Added: July 27, 2013 / Publisher:Netgear / File Size: 13.8 MB
OS: Windows


Release Date: April 20, 2013.

New Features and Enhancements:

  • Support Windows 8 32-bit SSL VPN.

Issues are resolved since last Release V3.0.8-12:

  1. Need options to set TCP and UDP Flood limits.
  2. Respond to ping on WAN interface for ANY IP and a single IP Address.
  3. Idle timeout field is NOT needed for IPSec users.
  4. Cannot add a ipsec user with space.
  5. Fail to add ipsec local user which name with space.
  6. After adding Secondary LAN IP , IP Address and Subnet mask are not blank.
  7. Select all day, schedule 1,2,3 are not same about that specific day still be selected.
  8. List below ports in GUI help Security - Service page.
  9. After changing gateway vpn to client vpn, the tunnel cannot be up.
  10. ipsec policy lose when remote id is after DUT reboot.
  11. No ipsec tunnel uptime in online help document.
  12. Increase this month limit can not disable.
  13. Support link is not expect web.
  14. The reboot time unmatch between popup message and the reboot page.
  15. Identifier canot input 131 characters.
  16. Bandwidth profile displaying abnormally when edit outbound bandwidth profiles to inbound.
  17. VPN wizard online help does not match the function.
  18. Dynamic DNS status display with messy code.
  19. No ipsec tunnel uptime in online help document
  20. Redundance message in ipsec mode config record.
  21. Cannot Creating firewall rules for TCP Port 113 (ident).
  22. VPN wizard gui values is not matching with the VPN Wizard default values in online help document.
  23. Unable to access attack checks page, observed "ADPOK" message.
  24. NFS service does not work in firewall rules.
  25. Device freeze once or twice a week.

Known Issues and limitations:

  1. Inbound voices are not heard between sip clients over vpn tunnel when sip server is lying in the remote private network.
  2. SIP clients at other end of tunnel are unable to register through VPN tunnel when SIP server is in LAN side of DUT.
  3. SSL VPN logs page not showing logs when ssl and port forwarding users disconnected.
  4. Unable to do ftp data tranfer when ssl client is behind nat router in port forwarding tunnel.
  5. Unable to edit the ipsec vpn user while in use.
  6. Bandwidth profile is not working over vpn tunnel.
  7. When a Firewall rule for Address Range is edited and Block always is selected the "WAN Destination IP address" is greyed out.
  8. IGMP information need to be updated in attack check help page.
  9. PPTP idle time out is not working when IGMP proxy enabled.
  10. Inconsistant behavior while establishing calls between LAN and WAN and vice-versa with IGMP Pass through enabled.

Recent Drivers

Netgear FVS318N Firewall Firmware Upgrade 4.3.0-19
Netgear SRXN3205 Firewall Firmware Upgrade 3.1.1-08
Netgear VPN Lite Software 5.50.007 for Windows Vista/7/8 x86/x64
Netgear FVS336Gv2 Firewall Firmware Upgrade 3.1.1-08
Netgear FVS318G Firewall Firmware Upgrade 3.1.1-08