Netgear GSM7224v2/GSM7248v2 Managed Switch Firmware Update 8.0.1.26

Publisher's description of Netgear GSM7224v2/GSM7248v2 Managed Switch Firmware Update 8.0.1.26

Bug Fixes:
* The user’s MAC is not added into vlan assigned by radius when "dot1x port-control mac-based" enable.
* Somehow during boot up, GSM7248v2 reports TFFTS error on the console.
* FAN Failure message are shown in GSM7224v2.
* Switch log reporting/snooping voip traffic even though voip is not enabled.
* Configure "ip verify binding" more than 110 on GSM7224v2 will cause reboot.
* IP source guard binding table doesn’t display completely in WEB GUI.
* GSM7224v2/48v2 system web page shows incorrect CPU temperature as "NA".

NOTES:

* Some of 7.x CLI commands may have command syntax changes in 8.0.
* The configuration of 7.x switch should be migrated to 8.0 during upgrade, but it is possible that after the upgrade, the configuration of the old may be lost.
* On certain GSM73xxS, the flash image may contain temporary files are taken up spaces and preventing the firmware upgrade. Please check with customer for how to clean up the flash if you encountered failure during upgrade.

Download Netgear GSM7224v2/GSM7248v2 Managed Switch Firmware Update 8.0.1.26