Buffalo WHR-300HP2 Wi-Fi Router Firmware Upgrade 1.80

User Drivers » LAN / Network Adapter » Buffalo »
Date Added: August 04, 2015 / Release Date: July 06, 2015 / Publisher: Buffalo / File Size: 5.66 MB
OS: Mac OS, Windows, Linux

Download

This firmware (version 1.80) is for the WHR-300HP2 only. Do not use it for other products.

Release Notes Version 1.80:

  • Fixed the issue where useless packets were sent to the wireless side when snooping functionality was enabled.
  • Fixed the issue where useless multicast packets were translated to unicasts.
  • Fixed the issue where IPv6 passthrough was not enabled even if it was enabled on the "Wireless Multicast Rate" page.
  • Fixed the issue where on the "Routing" page, certain unusable destination addresses were usable, and certain usable destination addresses were unusable.
  • Fixed the issue where settings could be restored even if the AirStation’s firmware version was older than the firmware version used to create the config file.
  • Fixed the issue where the error message for the encryption key was displayed on the "Easy Admin" page even if it is not needed.
  • Fixed the incorrect text of the message displayed when eco mode was configured.
  • Fixed the issue where the wireless bridge could not connect to the master router that did not broadcast SSIDs.
  • Fixed the issue where in some situations, such as a power outage, settings were initialized or the AirStation and modem were shut down at the same time.
  • Fixed the issue where if automatic update was enabled while the AirStation was not connected to the Internet, the firmware version is displayed as the latest.
  • Fixed the issue where the forwarded ports sometimes could not be edited correctly.
  • Fixed the issue where communication via LAN-side to another gateway sometimes could not be established properly.
  • Fixed the issue where connected devices could not be displayed on the "Connected Clients List" page when 2.4 GHz wireless was disabled.
  • Fixed the issue where the authentication screen was not displayed and the AirStation could not connect to the Internet when using some ISPs that require web authentication.
  • Fixed the issue where an IP address could not be obtained when using some cable TV providers’ Internet services.
  • Fixed the issue where the AirStation kept its IP address after obtaining an IP address from the DHCP server even if the IP address was released when the AirStation was in access point mode.
  • Fixed the issue where a ping test could not executed properly when the destination address was specified as a domain name.
  • Fixed the issue where Settings could be accessed via the SSID whose SSID isolation was enabled.
  • Fixed the issue where a config file saved while the AirStation was in router mode can restore settings when the AirStation is in access point mode.
  • Fixed the issue where a config file saved while the AirStation was in access point mode can restore settings when the AirStation is in router mode.
  • Fixed the issue where the DNS name resolution could not be done temporarily.
  • Fixed the issue where the Internet-side multicast packets sometimes flowed into the LAN side.
  • Fixed the issue where the AirStation could not connect to the Internet in access point mode when the AirStation connected to an SSID whose SSID isolation was enabled.
  • Fixed the issue where the AirStation could not connect to the Internet in wireless bridge mode when the AirStation connected to the SSID whose SSID isolation was enabled.

Recent Drivers

Buffalo WHR-1166D Wi-Fi Router Firmware Upgrade 1.80
Buffalo WHR-300HP2 Wi-Fi Router Firmware Upgrade 1.80
Buffalo WXR-1900DHP Wireless Router Firmware Upgrade 2.34
Buffalo WAPS-APG600H Wireless Access Point Firmware Update 1.14.0
Buffalo WAPS-AG300H Wireless Access Point Firmware Update 1.14.0